-Poured a little under a pint of water into a pan, gave it a bit of heat.
-Tipped 3 of these big spoons of flour into a glass.
-Added just enough water so it covered the flour then stirred until the mixture turned into a pourable paste. I made sure no lumps were present in the mix, gave it a good stir whilst the H20 in the pan was heating up.
-Brought the mixture to a boil whilst continuously stirring it.
-Once the glue had thickened I added and stirred in a tablespoon of white gold.
-The paste was now ready to go. I cut out my artwork, sourced a brush and transfered some paste to a little tub.
I then went out not too far from where I live to find a spot to paste up my artwork. I found a flat surface and smeared it with a decent amount of the mixture. I placed the cut out onto the area and applied more of the paste. I would've got photos of this process, but I had to keep a look out for people walking their dogs or whoever and it was getting quite dark at the time.
I shall go back to the spot tomorrow to see if it's all gone to plan...
No comments:
Post a Comment